9
Step 4: Thread the protective element (C) with assembled cable gland over the utility cable.
(Refer to Chart 1)
Chart 1
Step 5: Remove insulation sleeve 8 mm for three conductors. And shorten phase L and neutral
conductor N 3 mm.
Step 6: Insert utility cable through socket element (B) and tighten the screw to fix utility cable.
And push protective element (C) onto the socket element (B) until it audibly snaps into place.
screw
Step 7: Connect wires according to polarities indicated on AC output
terminal on the inverter and tighten the screws after connection.
L
→
LI N E ( b ro w n o r b la ck )
G
→
Gro u n d ( yello w
-green)
N
→
N eu tra l ( b lu e)
Step 8: Twist the gland so that the cable is firmly connected.
CAUTION: To prevent risk of electric shock, ensure the ground wire is properly earthed
before operating the solar inverter.
C
D
E
F
B