manualshive.com logo in svg

Optex Water It TC-3000-DI, Instruction Manual, Page: 25 / 36

Share
Download
Optex Water It TC-3000-DI Instruction Manual Download Page 25

Adjustment

25

During adjustment a progress bar is 
displayed.
When completed, the display returns 
to the measurement value display.

$GMXVW

㸰

7XUE7&'

6SDQ$GMXVWPHQW

2-point adjustment

Display current values of the 2 points as any adjustment values,  
respectively.
Performing 2-point adjustment changes the offset and span based on the 
adjusted values.
For 4-20 mA output (“6 4-20 mA Setting” P.15) and alarm output (“Alarm 
output setting” P.17), the adjusted values are applied.

Measurement 

item [Display]

Measurement item setting range  

(display value/adjusted value)

Factory default 

setting

Turbidity 
[Turb.]

[Point 1]: 0.0 to (2nd point value - 20)

0.0

[Point 2]: (1st point value + 20) to 3000 3000

Caution

If offset, span, or 2-point adjustment has already been performed, 
be sure to initialize the adjustment before performing the 2-point 
adjustment.

[Point 1]

Adjusted value

Measurement value

Current display

value

Adjusted

value

Display value

after 2-point

adjustment

Current display

value

[Point 2]

Press 

.

The measurement item selection display is displayed.

1

Summary of Contents for Water It TC-3000-DI





































Reviews:

No comments