Optex Water It TC-3000-DI, Instruction Manual, Page: 15 / 36

4-20 mA Setting
15
Set the 4-20 mA signal output setting from SC-U1.
The factory default setting is OFF for 4-20 mA signal output.
To set 4-20 mA output setting, press
.
6 4-20 mA Setting
Select an item to output by 4-20 mA signal.
Output item selection
Output item
[Display]
Turbidity
[Turb.]
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "5.3 4-20 mA Setting" and "
◆
Output Item Select".
Caution Pressing automatically retains the measurement value.
Caution
When “Display item (unit selection)” P.13 is changed, the
output item of the channel of 4-20 mA setting that has set the
display item becomes OFF.
Set again if necessary.