EN-5
2
-T
ype D
1
Loosen 2 screws and remove the wiring cover
.
2
Rotate the wiring cover by 180 degrees and replace it.
1
Rotate the main unit and insert the hook of the base cover into the position
where the letter "B" is written on the wiring cover
.
Note >>
2
Assemble parts just as step
2 to 3 for type
A.
-T
ype C
1
Rotate the main unit and insert the hook of the base cover into the slot of the
wiring cover
.
-T
ype B
Slot of the wiring cover
Hook
Then, place the main unit on
the base unit, so as to match
the screw hole of the main unit
and the one at the center of
the base cover as indicated.
Hook
3
Rotate the main unit and insert the hook of the base cover into the slot of the
wiring cover
.
Slot of the wiring cover
Hook
4
Note >>
Then, place the main unit on
the base unit, so as to match
the screw hole of the main unit
and the one at the center of
the base cover as indicated.
Note >>
Note >>
Note >>
Note >>
Then, place the main unit on
the base unit, so as to match
the screw hole of the main unit
and the one at the center of
the base cover as indicated.
Side cover L
Fixing screw
The positions of the fixing screw and side cover are shown
below.
Side cover L
Fixing screw
The positions of the fixing screw and side cover are shown
below.
The positions of the fixing screw and side cover are shown
below.
Assemble parts just as step
2 to 3 for type
A.
Assemble parts just as step
2 to 3 for type
A.
Side cover S
Side cover S
Side cover L
Fixing screw
Side cover S
Before assembling, confirm
the arrow mark on the wiring
cover and the same with
ABC on the main unit face
each other.
Before assembling, confirm
the arrow mark on the wiring
cover and the same with
ABC on the main unit face
each other.
Before assembling, confirm
the arrow mark on the wiring
cover and the same with D
on the main unit face each
other.
