WARRANTY
9.
SPECIFICATION
8.
MODEL NAME: OPTEX (IVP-GU) Gateway Chime Unit
Operating Temperature
8-1
Dimensions
8-2
Specification Table
ADDITIONAL SETTING
7.
(1) Entering Pairing mode of a Gateway Chime Unit (IVP-GU).
An IVP-GU is already set in a “Pairing mode” at the factory default setting.
To change IVP-GU into the “Pairing mode”, press down both A and B buttons
and hold until LED will brink in green and red.
To change a chime volume of IVP-GU
– Press button A to acknowledge current chime volume level. Press A button again to
change volume level to the next. The volume changes within 4 levels and the lowest
volume will follow the loudest. Leave the setting at the desirable volume level.
To completely turn off the chime, set Sound ON/OFF Switch to OFF.
110mm / 4.33”
80mm / 3.15”
Dust/Water Protection
Radiowave Frequency
0 to 40 degC (32 to 104 degF)
< 90% RH (no condensation)
N/A (Indoor Use Only)
2.4 GHz and 418MHz
Operating Humidity
Power
AC/DC 10-24V 3W(max)
5923260
REV 1.00
OPTEX INC. (U.S.)
URL: http://www.optexamerica.com/
OPTEX DO BRASIL LTDA. (Brazil)
URL: http://www.optex.net/br/es/sec/
OPTEX (EUROPE) LTD. / EMEA HQ (U.K.)
URL: http://www.optexeurope.com/
OPTEX CO., LTD. (JAPAN)
URL: http://www.optex.net/
Pairing button
(3) Confirming IVP-GU with a HOME ID.
When IVP-GU is assigned a new HOME ID, beeping stops and LED stops flashing to
indicate the normal operation mode.
30.3mm / 1.2”
(2) Prepare Handheld Monitor Unit (IVP-HU) for assigning a HOME ID for IVP-GU.
Press “Paring Button” on the back of an IVP-HU and choose “SCAN” by clicking
“left function key” on the IVP-HU. The IVP-HU starts scanning for a new device.
Handheld Monitor Unit (IVP-HU)
1. This product is under a warranty for a normal usage for 18 months from the date
of manufacturing. The date of manufacturing can be identified from a LOT number
indicated on a label placed in a back of IVP-GU.
2. The warranty may not be applicable when any of following circumstances is found.
- Mechanical or electrical modification is made to the product and the good’s
appearance indicates an alterations or a significant damage.
- The product is already been diagnosed by someone other than the manufacturer.
- Product malfunction is resulting from an improper usage, an accident,
natural disaster or any environmental event.
- Please call our technical assistance before arranging a return.
LOT: YYWWZ (e.g. LOT 1350Z)
YY indicates last two digits of the year manufactured (e.g. “13” = Year 2013)
WW indicates Xth week of the year manufactured (e.g. “50” = 50th week)
Relay Output
1C 50VAC/24VDC 1A max
PAIRING WITH OTHER DEVICES
6.
NOTE: One Handheld Monitor Unit (IVP-HU) must be configured to have
a HOME ID*
1
prior to paring up with other devices. For setting up
a new HOME ID, please refer to the Installation Instructions of IVP-HU.
A Handheld Monitor Unit bundled with Door Camera Unit (IVP-DU) already has
a HOME ID set up and paired up to each other.
*
1
HOME ID is an unique identification number for your system.
Pairing button A
& B
Sound ON/OFF Switch
While the IVP-GU is in a factory default setting,
the unit has not been assigned to a HOME ID. When powering the unit,
green and red LED will flash with beep sound to indicate its paring mode.
Please proceed to (2). (... continues onto the other side)
The Gateway Chime Unit operates regardless of
the switch setting while power is being supplied.
This switch is for turning
ON/OFF a speaker.
One system can host up to 2 units of Gateway Chime Unit (IVP-GU).
