INS-CUBE
INS-CUBE
INSTALLATION INSTRUCTIONS
Quick Guide
1
2
3
4
- Specifications
- LED indications
- Dimensions
- Detection area
- Compliance
Before installation
Others
<< Contents >>
Page
1
2
3
4
Step
Enable
Disable
Testing
Installation
Registration InSight to CHeKT portal site
DHCP
IP address settings
VISUAL VERIFICATION PIR CAMERA
Warning
Caution
Prohibition
Recommendation
Failure to follow the instructions provided with this indication and improper
handling may cause death or serious injury.
Failure to follow the instructions provided with this indication and improper
handling may cause injury and/or property damage.
NOTE Special attention is required to the
section of this symbol.
- Manufacturer's statement
Before installation
Full information is available at
https://www.optexamerica.com
This “Quick Guide” is the part of the entire installation instructions
that guides the installation procedures for installers.
Get the full information of the installation instructions from the web site.
If you need a guide to the operation of the whole system, please
consult the installer of the entire system.
•
•
•
1
series
For more information about Camera
setting, see our website.
www.optexamerica.com
- Manufacturer's statement
- Parts identification
- Accessories
- CHeKT account
CHeKT support
https://support.chekt.com
Destroy
/Modify
Wetting with water
Outdoor installation
Detection through glass
Partial/complete obscuration
of the detection area.
Tilt
Mounting height
2.0 to 3.0 m (6'7" to 9'8")
3.0 m (9'8") recommended
Follow to the Regulations
Warning
Caution
1-1. Install the mounting bracket
1-2. Remove the main unit from the base unit
1-3. Install/Remove an SD Memory Card
(optional)
1-4. Wiring
1-5. Mounting body
1-6. Secure the main unit to the base unit
4-1. Walk test and camera angle checking
4-2. System test
