-5-
2-3 TRANSMITTER PREPARATION
2-4 BEFORE MOUNTING
<When monitoring ALARM and TROUBLE using the transmitter with 1 external input>
<To monitor only the ALARM using a transmitter
with 1 external input>
<To monitor the ALARM and TROUBLE using a
transmitter with 2 external inputs>
35 (1.38)
130 (5.12)
30 (1.18)
External input is N.C.
External input is N.O.
3
... DIP switch 3: OFF (N.C.)
3
... DIP switch 3: ON (N.O.)
Connectors to be used
Connector for POWER and ALARM
Connector for TROUBLE
Red
Black
How to position a battery
Connector for POWER
and ALARM
Connector for
TROUBLE
Connector for
POWER and ALARM
N.C.
N.O.
Unit: mm (inch)
The transmitter used should have the internal dimensions of H 150 × W 34 × D 33 mm(H 5.91 × W 1.34 × D 1.30 inch)
or H 112 × W 55 × D 35 mm.(H 4.41 × W 2.17 × D 1.38 inch)
WRS-04 (option)
Store the connecting
cable in a trench
and seal with a label
already in place.
Remove the cap.
1
Open the cover unit.
2
Remove the main unit from
the back box.
3
Remove the back box
from the mounting plate.
4
Mount the wall tamper
(WRS-04) on the back
of the main unit.
1
Run the wire along
the wiring groove.
2
2-5 WALL TAMPER WRS-04 (OPTION)
