5-3
LED LIGHT PATTERN
The following explains the LED light pattern.
Detector condition
LED indicator
Warm-up
Note>>
The LED blinks even if the DIP
switch 4 (LED) is set to “OFF”.
•
Blinks for approx. 60 seconds.
Alarm
Lights for 2 seconds.
Masking detection
(FTN-AM only)
Note>>
The LED blinks even if the DIP
switch 4 (LED) is set to “OFF”.
•
Blinks 3 times and then repeats.
LED
Blink
Light
OFF
6
SPECIFICATIONS
6-1
SPECIFICATIONS
Model
FTN-ST
FTN-AM
Detection method
Passive infrared
PIR coverage
5 × 1 m (16'5" × 3'3")
Detection length limit
2 m, 5 m (6'7", 16'5")
Detectable speed
0.3 – 1.5 m/s (1' – 4'11"/s)
Sensitivity
2.0°C (at 0.6 m/s) (3.6°F (at 2'/s))
Operating voltage
9.5 – 18 V DC
Current draw
17 mA (max.) (at 12 V DC)
20 mA (max.) (at 12 V DC)
Alarm period
2.0 ±1.0 sec.
Warm-up period
Approx. 60 sec. (LED blinks)
Alarm output
N.C./N.O. Selectable 28 V DC 0.1 A (max.)
Trouble output
N.C. 28 V DC 0.1 A (max.), open when the cover is removed.
LED indicator
Light/Blink: Warm-up, alarm, masking detection (FTN-AM only)
Operation temperature
-20 – +60°C (-4 – +140°F)
Environment humidity
95% max.
Weatherproof
IP55
Mounting
Wall (Outdoor, Indoor)
Mounting height
0.8 – 1.2 m (2'7" – 3'11")
Weight
100 g (3.5 oz.)
Accessories
Screw (3 × 20 mm) × 2
*Specifications and design are subject to change without prior notice.
- 11 -
