16.
17.
You are now ready to initialize your ATM. Once in service,
perform a balance inquiry. If this transaction fails, verify your
setup in the previous steps. If you are still unable to perform a
successful balance inquiry, call the OptConnect Customer Care
Center at 877-678-3343 ext. 3 for assistance.
Host Setup >
Host Address >
URL En/Disable: Disable
Host Address 1 & 2 :
192.168.1.90
Host Port: 1&2:
*Host Setup >
Routing ID: Refer to page 25
DEFINE TCP/IP PARAMETERS FOR HOST PROCESSOR
Cardtronics
Columbus Data
Data Stream (ASAI)
DNA (Money Tree)
EFX
Elan/Genpass
1st ISO / First Data / Core Data
ITS Systems Integrators Co Inc
Metavante / PAI / FIS
NRT/TNS
Planet Payment
Switch Commerce
Worldpay / RBS Lynk
7004
7004
7006
7006
451
451
561
561
446
446
5166
5166 or 5167
8440
8440
888
888
450
450
7008
7008
5306
5306
7003
7003
6661
6661
PROCESSOR
HOST PORT 1
HOST PORT 2
NAUTILUS HYOSUNG ATMS
NAUTILUS HYOSUNG ATMS
PAYMENT GATEWAY
*STD1 only
NAUTILUS HYOSUNG ATMS
SSL: Disabled
-2(x) Cancel to Return-
Customer Setup>
*Standard 3 Options >
Status Monitoring: Enable
Comm Header: Enable
Comm ID: (refer to page 25)
CRC EN/Disable: Disable
-2(x) Cancel to Return-
Wireless TCP/IP communication requires defining two different
sets of parameters. Communication between the ATM and the
Wireless modem is regulated by the parameters defined in System
Setup. Communication between the wireless modem and the Host
Processor is regulated by parameters defined in Host Setup.
NAUTILUS HYOSUNG ATMS
PAYMENT GATEWAY
DHCP
IP Address
Subnet Mask
Default Gateway
DNS
Disable
192.168.1.91
255.255.255.0
192.168.1.90
8.8.8.8 or 8.8.4.4
TERMINAL IP
System Setup >
Terminal IP:
-2(X) Cancel to Return-
DEFINE TCP/IP PARAMETERS FOR ATM
*Please verify with processor
if set up on STD1 or STD3
-1(x) Cancel to Return-
