Opt OPT-DPA1024E-4 Page 18 Manual Download

Page: 18 / 40

OPT MACHINE VISION TECH.CO. LTD

ADD:8 JingSheng Road, JingXia ChangAn DongGuan China 523853

TEL: 0769-82716188 FAX: 0769-81606698

E-mail:

[email protected]

Website:Http://www.optmv.net

4.2 Software function description

Function

Operation

Show window

Set intensity

Choose the channel(s) (0 means all channels), set the

intensity within the range: 0-255

short/long

command

Set trigger pulse width

Choose the channel(s) (0 means all channels), set the

trigger pulse width within the range: 0-999 (unit: ms).

Then click “OK” or “Apply” button.

short/long

command

Set highlight trigger pulse

width

Choose the channel(s) (0 means all channels), set the

trigger pulse width within the range: 0-500 (unit:

0.01ms). Then click “OK” or “Apply” button.

short/long

command

Turn off channel(s)

Choose the channel(s) (0 means all channels), set the

trigger pulse width within the range: 0-500 (unit:

0.01ms). Then click “OK” or “Apply” button.

short/long

command

Turn on channel(s)

Choose the channel(s) (0 means all channels), set the

trigger pulse width within the range: 0-500 (unit:

0.01ms). Then click “OK” or “Apply” button.

short/long

command

Read intensity

Choose the channel then click “OK” or “Apply” button.

short command

Read trigger pulse width

Choose the channel then click “OK” or “Apply” button.

short command

Read

highlight

trigger

pulse width

Choose the channel then click “OK” or “Apply” button.

short command

Read ID

Click

“

detailed information

”

, one can check the ID of

the controller.

heck/modify

information

Read IP configuration.

Click

“

detailed information

”

, one can check the Click

“

detailed information

”

, you can check the ID of the

controller. of the controller.

heck/modify

information

Static/ dynamic IP switch

DHCP check box. When it is ticked, the IP is dynamic.

Otherwise, it is static. Default setting is dynamic IP

factory IP address: 192.168.1.16

subnet Mask: 255.255.255

default gateway: 192.168.1.1

heck/modify

information

Set IP configuration.

The IP need to be static.

heck/modify

information

Summary of Contents for OPT-DPA1024E-4









































Search results

Summary of Contents for OPT-DPA1024E-4

Reviews:

Related manuals for OPT-DPA1024E-4

Brands by name

Popular brands

Opt OPT-DPA1024E-4, Manual

Search results

Summary of Contents for OPT-DPA1024E-4

Reviews:

Related manuals for OPT-DPA1024E-4

Brands by name

Popular brands