The nozzle can also be used as a mount if your X-Carve has the stock 43mm 24V
spindle. If your X-Carve was delivered with DeWalt 611 or D26200 trim router, you’ll
have to either use the mount described “Getting started” chapter of this guide or cut
another one that fits the nozzle only, just like the one on picture below:
Easel project for this mount can be found here:
http://easel.inventables.com/projects/wfSareHaTE4gDrYl2azdKw
This is how PLH3D laser head with the nozzle fits into the mount and the X-Carve:
