LBL-2019-41-v4 OptoMonitor 3 IFU wTAVI_en Rev 2022-03
76
|
P a g e
4-
The recording starts when the button is pressed. NOTE: Some values may take some time to
appear. This is due to the averaging of the values over the selected number of beats. The heartrate
is averaged over a fixed number of beats and may take longer.
5-
During recording, tap the graphic area twice to create a marker (solid white line).
Before or during recording, you can press the values with the
, to change the displayed values.
6-
Press the “Stop” button to end the recording. The screen will switch to playback mode (see section
7.13.3 for a more detailed explanation of TAVI/TAVR playback).
7-
To make another recording, from the playback screen press the live button and press the record
button.
7.9.3
Viewing TAVI/TAVR in Playback Mode
Upon completion of a TAVI/TAVR recording, the screen will switch to playback mode where the user can
see all the recorded data of the current patient. If you wish to access playback mode without performing
a recording, press the “View” button from the MAIN screen.
All locally stored recordings for the current patient will appear in the recording selection box. If no case is
open, all non-case recordings will appear in the selection box. The user can use their finger to scroll
up/down to view all locally stored recordings and can tap a desired recording to load it into the graphical
window and data window.
The user can use their finger to scroll/zoom to view specific sections of the recording and identify regions
of interest.
The user can press on the signal to select the beats used to calculate the values on the right.
Pressing the “Play” button will cause the recording to replay as if it was a live measurement, from time =0
seconds. During this replay, the live value of FFR is displayed in the bottom of the information window.
Press the “Stop” button at any time during the replay to end it and return to the playback screen.