ORPAK
Tag Reader (OrTR) Cat No. 817410910
5
1.5. Supported Cards/Tags Options
This is a contactless card (see Figure 4) used as a fueling card by
the driver at the gas station. When the card is presented next to the
OrTR, it reads the card / tag data and transmits it to the station
controller in the gas station. Upon verification and approval, the
Station Controller activates and releases the pump valve, so fuel can
be dispensed to the vehicle. Four types of tags are recognized:
•
Driver’s tag: used to identify a specific driver. Therefore,
fuel dispensing is allowed only after the vehicle has been
identified by means of its Vehicle Identification Unit (VIU).
•
Vehicle’s tag: used to authorize fuel dispensing and
charging.
•
Attendant’s tag: permits operation of any fuel nozzle from
the OrTR by a station attendant.
•
Technician tag: used to setup OrTR RS-485 address
Figure 4. Typical MiFare Tag
