www.oppray-light.com PL-W0124 12 x 8W Flat Par
User Manual
service and/or cleaning procedure. Only handle the power cord by the plug
end, never pull out the plug by tugging the wire portion of the cord.
•
Do not operate this fixture if the power cord has become frayed, crimped
and/or damaged. If the power cord is damaged, replace it immediately with
a new one of similar power rating.
N E V E R O P E N T H I S F I X T U R E W H I L E I N U S E !
•
Ensure ALL connections and end caps are properly sealed with a
dielectric grease (available at most electrical suppliers) to prevent
water corrosion and/or electrical short circuit.
During the initial operation of this fixture, a light smoke or smell may
emit from the interior of the fixture. This is a normal process and is
caused by excess paint in the interior of the casing burning off from
the heat associated with the lamp and will decrease gradually over
time.
•
This fixture is a professional lighting effect designed for
INDOOR / DRY
LOCATIONS ONLY
on stage, in nightclubs, theatres, etc.
•
Please make sure there are
NO FLAMMABLE MATERIALS
close to the
fixture while operating, to prevent any fire hazard.
•
Minimum
distance of inflammable materials from the surface 1.6 feet
(0.5m).
•
DO NOT
attempt installation and/or operation without knowledge how to
do so.
•
DO NOT
allow operation by persons who are not qualified to operate this
type of fixture. Most damages are the result of operations by
nonprofessionals.
•
Consistent operational breaks may ensure the fixture will function properly
for many years to come.
•
DO NOT
shake fixture, avoid brute force when installing and/or operating
fixture.
•
Always install the fixture with an appropriate safety cable. When installing
