S E T U P
M E N U
O P T I O N S
76
8.
Headphone Volume
: Allows you to enter the default volume level for the headphone output. To
change the level, press the
ENTER
button to bring the volume setting bar and press the
LEFT/RIGHT
ARROW
or
VOL+/-
buttons to adjust the value. By default the volume level is set to 75.
9.
XLR Terminal Polarity
: To set the polarity of the BALANCED STEREO AUDIO OUT terminals on
BDP-105D. Please compare the positions of “hot” (positive) and “cold” (negative) pins on BDP-105D
terminals (show in the page 17) with those on your audio system. The available options are:
x
Normal
– The XLR three-pin positions on your audio system are the same as those on BDP-
105D terminals.
x
Inversion
– The positions of “hot” (positive) and “cold” (negative) pins on your audio system
are switched comparing with those on BDP-105D terminals.
10.
Stereo Signal
: To select the audio source that will be processed and sent out through the STEREO
and the XLR BALANCED STEREO audio terminals. The available options are:
x
Down-mixed Stereo
– The stereo or down-mixed stereo signals are processed and sent out
from the dedicated stereo output terminals.
x
Front Left/Right
– The original Front Left (FL) and Front Right (FR) signals are sent out
from the dedicated stereo output terminals. The purpose is to fully utilise the better DAC
hardware originally assigned to the dedicated stereo outputs for customers who prefer multi-
channel speakers and do not need the dedicated stereo output or zone 2 output. When this
option is selected, the dedicated stereo output ports should be used as the Front outputs of
the 7.1ch / 5.1ch / Stereo Audio group. The original FL/FR RCA connectors should not be
connected.
A/V Sync
: Allows you to add a slight delay to the audio so it is synchronized to the video. You may
use the
LEFT/RIGHT ARROW
buttons on the remote to decrease/increase the audio delay. The delay
can be adjusted in 10ms steps and within the range of -100ms to +200ms. The delayed time will be
applied to all output terminals including HDMI 1 and 2, Coaxial, Optical, 7.1 and Stereo outputs.
7.
NOTE
The actual audio delay effect might be different for each of the output terminals due to the
different audio process algorithms and signal paths used for each output. Please adjust this
setting based on the actual output terminal in use.
The negative adjustment values are for cancelling out the audio delay that the player
automatically applies. Depending on the video source and the time it takes to process the
video, the main decoder chip automatically applies an audio delay in order to optimize audio
video synchronization. The negative manual settings reduce the automatic audio delay, while
the positive manual settings apply additional delay. Any negative value setting beyond the
player's automatic delay will be treated as completely cancelling the automatic delay. For
example, if the "A/V Sync" value is manually set to -100ms and for the current video source
the player applies a 70ms automatic audio delay, the final result is that the 70ms audio delay
gets cancelled and the audio is not delayed at all. It is not possible to put audio ahead of video
using this setting.
For content sent through HDMI IN, the "A/V Sync" adjustment only works with positive values.
6.
Maximum Volume
: Allows you to set the maximum volume level. This option will be applied to the
7.1 and Stereo audio outputs. You may use the LEFT/RIGHT ARROW buttons on the remote to
decrease/increase the volume level. The default value is 100.
Summary of Contents for BDP-105D (EU)
Page 1: ...USER MANUAL READ CAREFULLY BEFORE OPERATION Blu ray Disc Player BDP 105D EU ...
Page 99: ...51978948 V1 1 ...
Page 100: ... ...
