S E T U P M E N U O P T I O N S
72
6.
Maximum Volume
: Allows you to set the maximum volume level. This option will be applied to the 7.1
audio outputs. You may use the LEFT/RIGHT ARROW buttons on the remote to decrease/increase the
volume level. The default value is 100.
7.
A/V Sync
– Allows you to add a slight delay to the audio so it is synchronized to the video. You may
use the LEFT/RIGHT ARROW buttons on the remote to decrease/increase the audio delay. The delay
can be adjusted in 10ms steps and within the range of -100ms to +200ms. The delayed time will be
applied to all output terminals including HDMI 1 and 2, Coaxial, Optical, and 7.1 outputs.
NOTE
For content sent through HDMI IN, the "A/V Sync" adjustment only works with positive values.
The negative adjustment values are for cancelling out the audio delay that the player automatically
applies. Depending on the video source and the time it takes to process the video, the main
decoder chip automatically applies an audio delay in order to optimize audio video synchronization.
The negative manual settings reduce the automatic audio delay, while the positive manual settings
apply additional delay. Any negative value setting beyond the player's automatic delay will be
treated as completely cancelling the automatic delay. For example, if the "A/V Sync" value is
manually set to -100ms and for the current video source the player applies a 70ms automatic audio
delay, the final result is that the 70ms audio delay gets cancelled and the audio is not delayed at
all. It is not possible to put audio ahead of video using this setting.
