
Infrared Remote Control
Play/
Pause
Stop
OK
DEL
Unlock
BRI
MON
CON
SAT
Exit
Play/Pause: Play/Pause
[
]
[
]
[
]
[
]
INT : Intercom
BRI: LCD Brightness
REC:
SAT :
Exit quit return
MON:
Stop
:
Stop
[
]
: Choose up / Increase
:
Down / Reduce
: Left
:
Right
: Confirm
DEL: Delete key
Video Button
CON
:
LCD
Contrast
LCD Color
Exit:
Monitor
Unlock:
Release
door
①
②
③
④
⑤
⑦
⑨
⑥
11
1
2
①
②
③
④
⑤
⑦
⑧
⑨
⑥
11
Bracket Installation
1
2
⑩
⑧
⑩
REC
INT
OK
1
3
1
4
1
5
1
6
1
3
1
4
1
5
1
6
When have alarm from camera and monitor.
First step: Fix the camera screw at the bottom well. At this time, still have alarm.
Second step: Press the unlock button to close the alarm.
Close Alarm
14.2
Click"UP/DOWN" to set auto/ manual video ,click "OK" to confirm and back ,It
was menu video when produced from factory.
-12-
1 5
Password:
15 1
Click "Password" to enter to Password setting
15 2
Click "LEFT/RIGHT" to choose the digital of new/old passwords , Click "UP/DOWN"
to increase/reduce the digitals, ,click "OK" to confirm .If key in previous password
right will display "Success" ,back to setting menu. If wrong previous password, will
display "Failed" back to password setting, ply reset.
15 3
Click "Back" exit to menu and enter to standby status.
16
Wallpaper
Click "Wallpaper" to restore the standby photo
.
.
.
.
.
:
-11-
8.
ID-set
8.1
Click" ID-set" enter to monitor setting menu.
8.2
Click" UP/DOWN" to choose the ID number (1-3).
8.3
Click "OK" after choose correctly.
Note: One outdoor unit can support 3 pcs indoor monitor ,To distinguish the monitors,
you need to set ID number for each monitor ,at present numbers can be selected
from 1-3.and ID number can not be reinvented between monitors to make sure
there is no disturb between each other .
9 .
Bright: LCD Brightness
Brightness adjustment will be devised in 5 levels (can be adjusted in menu).
9.1
Click "Bright" to enter brightness adjust menu.
9.2
Click" UP/DOWN" to increase/reduce the brightness (5 levels),Click "OK" to
confirm the level and back to setting menu.
9.3
Click" Back" to exit to menu and enter to standby status.
Att: Click "UP/DOWN" to highest or lowest level will be invalid.
10.
Color
10.1
Click "Color" enter to monitor outdoor unit. Can view outdoor image if
communicate fine.
10.2
Press "V+" button on the back of the monitor to adjust the brightness (5 levels),
Press "V-" button to adjust the chrome
(
levels
).
10.3
Press "Monitor" button to exit or waiting 60s to back to standby status
automatically.
11.
Standby
11.1
Click "Standby" to enter to setting of standby time.
11.2
Click "UP/DOWN" to increase/reduce standby time(10s-60s)
,
click "OK" to
confirm and exit to standby time setting menu.
11.3
Click "BACK" to exit to menu and enter to standby status.
5
12
.
Volume
8
levels for volume adjustment.(can be adjusted on volume setting only)
12.1
Click "Volume" to enter to volume setting
12.2
Click"UP/DOWN" to increase /reduce the volume(8 levels) click "OK" to confirm
and back to volume setting
12.3
Click "Back" exit to menu and enter to standby status.
Att: Click "UP/DOWN" to highest or lowest level will be invalid
13.
Time
13.1
Click "Time" to enter to time setting.
13.2
Click "LEFT/RIGHT" to choose the digital of the time and date ,Click "UP/DOWN"
to increase/reduce the digitals ,click "OK" to confirm and back to time setting.
13.3
Click "Back" exit to menu and enter to standby status.
14
.
Auto-DV
14.1
Click "Auto-DV" to enter to Auto-DV setting.
click to listening test.
7.3
Click"DEC/ADD"to adjust the volume(4 levels in total).
7.4
Click "OK" to confirm the tone (income tone).
7.5
Click" BACK" to back to the menu and enter to standby status.