4
Instruction 108.982
Rainbow Light Ball
Attach the two blade receptacles (7) to the two cable ends. (soldering
or twisting/ clamping)
13
7
Connect a flat battery as shown and place it in the frame. Note: This
can be attached with double-sided adhesive tape or hot-melt adhesive.
13
tip:
To fix the battery, drill a hole (ø2) in two opposite strips. Cut off 2
pieces with a length of approx. 100mm from the remaining jumper
wires and attach a knot to one end of each. Thread the wires from
the outside through the holes, the knots prevent them from slipping
through. Insert the battery and twist the cables over the battery.
