4
D208257#1
Step 11:
Glue two cardboard wheels (3) together.
Then cut both wheels out of the templa-
te and punch out the openings with the
punch pliers. Then glue the wheels onto
the double wheels (3).
Step 14:
Done!
Insert an AA 1,5 V mignon battery. The
vehicle will start moving when the switch
is switched on!
Step 12:
Fit the two wheels on both sides of the
axle, align and glue them to the axle!
Instructions
Fahr
trich
tung
Step 13:
Cut out 4 pieces 25 x 50 mm each from a
piece of cardboard (approx. 100 x 50 mm).
Fold in the middle and glue as reinforce-
ment from below to the "nose" and tail as
shown in the illustration. Cut off excess
cardboard.
