3
6
1f
Bend the front spoiler (1f) at the bending edges as shown.
7
1e
Bend the motor bracket (1e) by 90° as shown.
8
Shorten the axle holder (2) to 105 mm and deburr. Then scribe 15 mm
on both sides and bend both ends by 90°.
9
2
Fasten the axle holder (2) to the base plate (1) as shown with a screw
(8), a washer (11) and a stop nut (10).
2
1
10
11
8
10
Screw the bracket (1e) for the geared motor (4) to the base plate by
using two screws (8) , two washers (11) and two nuts (9) as shown.
1
8
1e
11
Screw the rear spoiler (1d) to the base plate by using two screws (8),
two washers (11) and two nuts (9) as shown.
9
11
8
9
11
1d
Building Instruction 120.852
Aluminium Trike with Gear Motor
