Opitec 114.734, Quick Start Manual

Page: 1 / 7

1
E114734#1
114.734
L o r r y m a d e f r o m P V C
w i t h L E D l i g h t i n g
PARTS LIST
Quantity Size (mm) Description Part No
PVC square tube 1 195x40x40x2 Cab, trailer,axle 1
PVC L-profile 1 95x15x15x2 SBumper,switch, fixing 2
Threaded rod 1 200x3 Axles 3
Countersink screws 1 16x3 Trailer coupling 4
Nuts 3 M3 M3 coupling 5
Lock Nuts 1 M3 Fixing 6
Washers 2 7/3,2mm Fixing 7
Cable ,red 1 500 Wiring 8
Cable black 1 500 Wiring 9
Battery clip 1 Battery connection 10
Micro slide switch 1 19x6 On /off switch 11
Reisistor 180 Ohm 1 Circuit control 12
Light Diode , red 2 ø3 Rear light 13
Light diode , yellow 2 ø3 Front light 14
Wheels 6 ø21,5 Wheels 15
Necessary tools:
Fretsaw
Workshop file
Drills 3, 4 and 13 mm diameter
Countersink bit
Soldering iron and solder
Plastic glue or instant glue
Spanner M4
Hacksaw
Vice with soft jaws
Please Note
The OPITEC range of projects is not intended as play toys for
young children.They are teaching aids for young people
learning the skills of Craft, Design and Technology.These
projects should only be undertaken and tested with the
guidance of a fully qualified adult.
The finished projects are not suitable to give to children
under 3 years old. Some parts can be swallowed. Danger of
suffocation!