3
E114033#2
Instructions
Step 6:
Connect up the various components with wire (6/7). Cut
the cable to length as shown (see diagram) strip the insulati-
on from the ends
ca. 60mm red
ca. 90mm black
ca. 40mm red
ca. 40mm
black
ca. 60mm black
ca. 60mm red
ca. 50mm red
ca. 80mm black
ca. 40mm red
ca. 30mm red
ca. 40mm
black
Battery cable ,shorten
ca. 50mm
Step 7:
Insert the (2x 1,5 V AAA) batteries.
Insert the rear LEDs (4, red) in the
holes at the rear chassis.
Step 8:
Insert the two front LEDs (2, white)
through the holes in the front and
then finish by pressing the top down
on the base -chassis. Finished!
Step 9:
LED blue
LED red
LED white
