4
E113141#1
54
60
75
10
Ø 2
54
60
75
10
Ø 2
54
60
75
10
Ø 2
54
60
75
10
Ø 2
Instructions
9. Take the wooden strip (3) and cut it to
60mm long and round the ends. Drill
the 2mm hole.
Glue the tail fin (i) on the wooden strip
(3) glue it in the middle of the strip
lined up with the back.
Lay the distance piece (11) under the
tail fin as shown and screw(4) the fin in
place so that it can be adjusted from
one side to the other.
11. Join/ solder the black cable from the battery holder (8) to the
80mm long cable from the switch (7) Solder the red cable from
the battery holder (8) with the plus pole of the motor(6). Then
solder the long cable from the switch (7) to the minus pole of the
motor.
Fucntion control:
Place the batteries in the holder and switch it on.
The propeller shoud now blow the airstream backwards so that
the seaplane travels forward. The direction can be set by adjus-
ting the tail fin. If all goes well the battery box can be placed in its
opening.
Ready!
10. Paint the seaplane as you wish.
We recommend a coat of clear varnish to finish to ensure that your
model is water resistant
Summary of Contents for 113.141
Page 6: ...6 E113141 1...
