6.2 Assembling the parts
6.2.1 Saw the dowels (2) to 265mm long
Mark out and saw a 45 degree mitre the on each end of the dowel as shown, be careful that they do
not slip or turn during this stage.
Note:
The dowels must all be cut accurately to the same length so that the distance between
the stool legs is accurate.
6.2.2 Insert the dowels (2) into the holes in the stool legs and check that they fit correctly
6.2.3 Insert the dowels into the holes in the legs (1) one beech, one dowel (2) as shown in the diagram and
glue them in position.
Note:
Check the assembled parts for squareness
6.2.4 Once you are satisfied, assemble the rest of the frame.
Note:
Check the completed stool frame again, to ensure that it is steady and does not rock.
Use a ruler to measure the diagonals, check to see if they are of equal length.
Clean up any excess glue with a damp cloth. Leave the stool to dry before weaving the
top
4
E108661#1
45°
saw blade
wooden block
2
2
2
2
2
2
