Ophit OMP-DP User Manual Download Page 2

User’s Guide

Installation steps:
1.

Connect the transmitter module to the DisplayPort source 
device. 

2.

Connect the receiver module to the display 

3.

Connect the MPO/MTP optical cable(8 ch or 12 ch) from 
transmitter to the receiver   

4.

Connect the in5V DC power supply into the receiver

5.

Green LED indicator on the modules will be light up after all 
connections are completed     

Check your package 

Installation 

Check the package and make sure you have everything:

Contents
(1) OMP-DP Transmitter & Receiver 
(2) +5V DC Power supply x 1ea 
(3) User’s Guide  

If any of these items are missing in your package, contact OPHIT or 

your supplier for support. 

Installation steps:
1.

Connect the transmitter module to the DisplayPort source 
device. 

2.

Connect the receiver module to the display 

3.

Connect the MPO/MTP optical cable(8 ch or 12 ch) from 
transmitter to the receiver   

4.

Connect the in5V DC power supply into the receiver

5.

Green LED indicator on the modules will be light up after all 
connections are completed     

Check the package and make sure you have everything:

Contents
(1) OMP-DP Transmitter & Receiver 
(2) +5V DC Power supply x 1ea 
(3) User’s Guide  

If any of these items are missing in your package, contact OPHIT or 

your supplier for support. 

NOTE: Package content may differ if you have placed a special order or  
placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without further notice 
to a product described herein to improve reliability, design, packaging or 
function. 

DC +5V 

Power jack (RX)

MPO/MTP
Connector

Power  LED

indicator

DC  Power Jack is blocked (TX)

 

OMP-DP TX doesn’t need external  

power supply.

Reviews: