OPHIR BeamSquared, User Manual

Page: 31 / 112

Help
Select the help icon to bring up this user guide quickly without leaving the software.
Standard Windows Controls
Minimize, Maximize, and Close buttons.
Ribbon Tab 3.1.2
Defines the current ribbon control being accessed. Double click
on a blank space in this bar to minimize or maximize the entire
display. Double click on a tab to minimize and maximize the
ribbon bar.
If the ribbon bar is closed, a single click temporarily opens the
selected tab.
Ribbon Bar 3.1.3
Displays the current set of panel control
options available within a selected ribbon tab.
These panels contain all common control
items.
Panels 3.1.4
Panels contain buttons, drop-down lists, edit controls, etc. Tool tips are
available on most all controls, hover the mouse to view.
Display Area 3.1.5
The display area consists of all docked display windows. Each display can be disabled, resized, docked, or
floated to any location on the screen. The content of the display area is explained more in section 3.8.
Status Bar 3.1.6
The BeamSquared status bar contains information about the connected camera and Automated BeamSquared
unit. The icons on the right change based on how the system is setup. If multiple runs are initiated, then the
current run is displayed
. If Logging is enabled then the logging information is displayed
. These icons are for visual reference and have no other functions.