OPHIR BeamSquared, User Manual

Page: 53 / 112

Interface Customization 3.8
BeamSquared has the ability to create flexible display environments to meet the user’s specific needs. All
windows have the ability to hide, float, and reposition on the screen. The application opens with the same
configuration as when it was closed.
Default Layout Custom Layout
Docking Handles 3.8.1
To undock a window, grab the tab with the mouse and drag down into the window area. When dragged, a set
of docking handles appear as shown. In this example, the
Measured Caustic Display window is being
dragged. Drag the display over one of the dock handles and release to place the window in that position. If
the window is not released on one of the dock handles, it floats. All windows can be docked to any of the
display handles or left to float anywhere on the screen.
Each window has its own set of
dock handles, allowing child
windows to be docked within
each new window. Windows can
be placed side by side, and over
and under each other.
Floating windows can be
maximized to fill the screen.
They can also be re-docked into
the main application by dragging
the title bar into the main
display window and dropping on
a dock handle.