Opex Model 72, Operator'S Manual

Page: 85 / 104

Maintenance 85
Model 72™ Operator Manual
OPEX Corporation
6.2. Adjusting the desk height (if enabled)
The Model 72 desk assembly has an optional electric lift
system, which allows you to adjust the height of the
desktop work surface for convenience and comfort. The
ability to adjust the height is disabled when the Model 72 is
running or if the interlocks are tripped.
Note: Model 72s without the optional electric lift system will have heavy duty
wheels on the right side, and regular feet on the left side.
To raise or lower the desk
This feature is only available on a Model 72 with the option lift system installed
and enabled.
1. When the
LIFT SYSTEM
machine parameter is enabled, the arrows on the
Login, Run and Pre-Run screens alert you that it is possible to raise or
lower the desktop work surface (see Figure 6-2).
Figure 6-2: Lift system enabled
Note: If the Lift System machine parameter is not enabled, you will not see
the arrows on the Login, Run and Pre-Run screens.
2. When the arrows appear on the LCD screen, you can use the Up and
Down buttons on the keypad to adjust the table height. Press and hold the
Up or Down button. Both arrows will momentarily flash and you will hear a
warning beep. This momentary delay and audible warning will help prevent
the table height from changing if you should accidentally bump the buttons.
Note: If an interlock is tripped, the lift system will not function. The login
screen function monitors and reports open interlocks to the operator who is
attempting to use the lift system.
Accommodates
wheelchair access
Arrows appear
when lift system
is enabled