Opex Falcon+, Operator'S Manual

Page: 14 / 132

14 Introduction
Operator Manual
OPEX Corporation
1.3. Safety Guidelines
The information provided in this section is intended to educate you on various
safety issues regarding the operation and maintenance of the OPEX
equipment, and provides an explanation of the safety guidelines to be
observed when working with this equipment.
Note: This manual describes operation of the series of scanners. If
you have a different model, or any optional features, refer to that product’s
manual before proceeding with this manual.
1.3.1. Safety Precautions
•
Be careful when working with AC power. Electrical wiring can be hot any
time the machine is plugged in. Failure to use caution may result in electric
shock or death.
•
Do not set liquids/drinks on the scanner that could spill into the machine.
•
Keep loose objects away from any exposed, moving parts of the machine.
The moving parts of the can become jammed and/or damaged by
foreign objects. Also, keep hands, hair, loose clothing or jewelry away from
the moving parts.
• Do not attempt to clean the machine while it is running. A cloth (or similar
material) should never be used to clean moving parts such as belts or
rollers. The use of such material on moving mechanisms can result in
damage to the machine or severe personal injury.
•
Do not use flammable, high pressure, “canned air” to clean paper scraps
and dust from the machine.
• Do not move the machine while the power is on. Unplug the machine from
the power source first.
WARNING
Follow these safety guidelines to avoid injury whenever operating or
maintaining the equipment described in this manual. Failure to follow these
precautions may result in severe personal injury or damage to the machine.