Opex Falcon Transportable, Manual

Page: 18 / 44

18 On-site Travel
Falcon Transportable Manual - OPEX Corporation
Attach the front travel support across the two remaining ball connectors on the
fronts of the legs.
This support is omitted if you are engaging the travel supports on a deployed
Falcon for movement within the same building. In this case, put it back in its
holding clips on the top-right / bottom-left support at the rear of the machine.
Turn the travel supports’ black handles clockwise to tighten them. Tug on each
ball-and-socket joint to verify they are secure. Also check that the swing arm on
the top-left / bottom-right support has its extension button locked in place.
Pin should
protrude here
Check all sockets