Opex Enveloper OM210, Operator'S Manual

Page: 104 / 148

Pitney
Bowes
52 Operation
Omation Series 210™ Envelopener® Operator Manual
OPEX Corporation
4.2.2. Cutter Adjustment
The cutter depth has been adjusted from the factory and should not need to be
adjusted. If you find that mail is not being opened on cutter setting 1 and 2, the
cutter can be adjusted.
To adjust the cutter depth:
1.
Set the Cut knob to the “ Standard Cut ” position (Figure 4-17). This position
should always cut standard mail deep enough to remove the contents but
not cut any of the contents. This position will be our reference for the
adjustment.
Figure 4-17: Standard Cut position
2. Remove the nip assembly cover (See
“Cleaning the Series 210 Envelopener®”
on page 49
).
No Cut
Standard Cut (shallowest)
Third Cut (deepest)
Second Cut (deeper)
This PDF has been created for exclusive use for
Pitney Bowes
This PDF has been created for exclusive use for Pitney Bowes
This PDF has been created for exclusive use for Pitney Bowes