Opex Eagle Remittance Processor, Operator'S Manual

Page: 53 / 108

Operating the System 53
Eagle Operator Manual
OPEX Corporation
4.5.2. Loading envelopes
Make sure envelopes are properly loaded on the conveyor in order to run the
job.
1.
Place envelopes in a stack on the conveyor as shown in Figure 4-7 and
Figure 4-8. Make sure the envelopes are facing the proper direction as per
the job parameters. If possible, load the entire conveyor with envelopes.
Note: The Run screen status display (
Figure 4-10 on page 55 ) will tell you
how to load the envelopes for the selected job.
Figure 4-7: Loading envelopes
Figure 4-8: Properly positioned envelopes