Opex Eagle Remittance Processor, Operator'S Manual

Page: 46 / 108

46 Operating the System
Eagle Operator Manual
OPEX Corporation
4.1. Turning the Power On/Off
Power up the machine
1.
Turn the breaker switch (Figure 4-1) to the On position. The standby light
will begin to blink.
Figure 4-1: On/Off button locations
2. Press the white ON button. The On button will light up and the standby light
will remain solid. The machine will begin its power up routine and the
computer and monitor will come on.
Note: If the ON button is flashing, this means an interlock is open. Close
any open doors on the machine to continue.
3. Log in to Windows.
Turn the machine off
1.
Press the black Off button (see Figure 4-1). The standby light will blink.
2. Turn the breaker switch to the Off position.
Off button
On button
Standby light
Breaker switch
ON (up) OFF (down)