9
6. Adjust the tone arm 's VTA.
As mentioned on the point 2 not screw the arm base tighten, raising or lowering oil cup and then
tightening set screws when correct VTA is obtained. Please note that can not be forced in order to
avoid damage the tone arm. Normally the correct VTA is subject to the tone arm centerline
parallels to the LP record, the high or low of VTA is very important for the sound, this is also fun of
LP playing.
TECHNICAL SPECIFICATION
Mounting distance arm base 214mm
Tone arm length 9
’’
Arm tube made of carbon-fibre
Overhang 16mm
Offset 23 degree
Cartridge weight 4-22g
Down force range 10-35mN
Weight(without counterweight) 37g
Counterweight 65g
