SWG-2016/32 User Manual
39
OpenVox Communication Co. ,LTD.
Website: www.openvox.cn
Default T1 Timer
This timer is used primarily in INVITE transactions. The
default for Timer T1 is 500ms or the measured run-trip time
between the gateway and the device if you have qualify=yes
for the device.
Call Setup Timer
If a provisional response is not received in this amount of
time, the call will auto-congest. Defaults to 64 times the
default T1 timer.
Session Timers
Session-Timers feature operates in the following three
modes: originate, Request and run session-timers always;
accept, run session-timers only when requested by other
UA; refuse, do not run session timers in any case.
Minimum
Session
Minimum session refresh interval in seconds. Default is
90secs.
Maximum
Session Refresh
Interval
Maximum session refresh interval in seconds. Defaults to
1800secs.
Session Refresher
The session refresher, uac or uas. Defaults to uas.
4.1.2 Add New IAX2 Endpoint
You can click
button to add a new IAX2 endpoint, and if you want to
modify existed endpoints, you can click
button.
There are 3 kinds of registration types for choose. You can choose None, Endpoint registers with
this gateway(work as a Server) or This gateway registers with the endpoint(work as a Client).
You can configure as follows:
If you set up a IAx2 endpoint by registration “None” to a server, then you can’t register other IAX2
