OpenVox iAG Series User Manual Download Page 39

Page: 39 / 69

iAG200/400 Series Analog Gateway User Manual

OpenVox Communication Co. ,LTD.

URL: www.openvox.cn

4.4 Advanced SIP Settings

4.4.1 Networking

Figure 4-4-1 Definition of Networking Options

Table 4-4-1 Definition of Networking Options

Options

Definition

UDP Bind Port

Choose a port on which to listen for UDP traffic.

Enable TCP

Enable server for incoming TCP connection (default is no).

TCP Bind Port

Choose a port on which to listen for TCP traffic.

TCP Authentication

Timeout

The maximum number of seconds a client has to authenticate. If the

client does not authenticate before this timeout expires, the client will be

disconnected.(default value is: 30 seconds).

TCP Authentication

Limit

The maximum number of unauthenticated sessions that will be allowed to

connect at any given time(default is:50).

Enable Hostname

Lookup

Enable DNS SRV lookups on outbound calls .

Note: the gateway only uses the first host in SRV records Disabling DNS

SRV lookups disables the ability to place SIP calls based on domain names

to some other SIP users on the Internet Sepcifying a port in a SIP peer

definition or when dialing outbound calls with supress SRV lookups for

that peer or call.

Summary of Contents for iAG Series






































































Search results

Summary of Contents for iAG Series

Reviews:

Related manuals for iAG Series

Brands by name

Popular brands

OpenVox iAG Series, User Manual

Search results

Summary of Contents for iAG Series

Reviews:

Related manuals for iAG Series

Brands by name

Popular brands