DGW-L1 User Manual
OpenVox Communication Co.Ltd www.openvox.cn
19
SS7
Display Receive
Send /receive ISDN display IE option. The display option are a comma
separated list of the following option:
Block:
Do not pass display text data.
Name_initial:
Use display text in SETUP/CONNECT messages as the party name.
Name_update:
Use display text in other messages
NOTIFY/FACLITY for CLOP name update.
Name:
Combined name_initial and name_update options.
Text:
Pass any unused display text data as an arbitrary display message during
a call. Send text goes out in an INFORMATION message.
Defaults to name.
Overlap Dialing
Enable overlap dialing mode--sending overlap digits.
Allow Progress
When Call
Released
Allow inband audio (progress) when a call is RELEASEd by the far end of a
PRI.
Out-of-Band
Indications
PRI Out of band indications. Enable this to report Busy and Congestion
on a PRI using out-of-band notification. Inband indication, as used by the
gateway doesn't seem to work with all telcos.
Facility-based
ISDN
Supplementary
Services
To enables transmission of facility-based ISDN supplementary services
(such as caller name from CPE over facility). Cannot be changed on a
reload.
Exclusive Channel
Selection
If you need to override the existing channels selection routine and force
all PRI channels to be marked as exclusively selected, set this to yes.
priexclusive cannot be changed on a reload.
Ignore Remote
Hold Indications
If you wish to ignores remote hold indications enable this option.
Block Outbound
Caller ID Name
Enable if you need to hide the name and not the number for legacy PPBX
use. Only applies to PRI channels.
Wait for Caller ID
Name
Support Caller ID on call waiting.
