D410E/DE410E on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
14
D410E/DE410E. If it has been recognized,
"
communication controller
"
will be displayed in the output information like that:
01:02.0 Communication controller: Digium, Inc. Wildcard TE410P/TE412P quad-span
T1/E1/J1 card 3.3V (rev 02)
Control: I/O+ Mem+ Bu SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 225
Region 0: Memory at dcdffc00 (32-bit, non-prefetchable) [size=128]
Figure 3 Hardware detection
If D410E/DE410E is not recognized by the system, you have to power off
and take out the card, then try to insert it into another PCI-E slot.
2. Software installation
Some dependencies are crucial. If any of them is absent, the software
installation process would not go through successfully. Let’s run
"
yum
install XX
"
(XX stands for the dependency’s name) to check the
availability of dependencies.
# yum install bison
# yum install bison-devel
# yum install ncurses
# yum install ncurses-devel
# yum install zlib
