B100E on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
23
; Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER)
group=0,11
context=from-isdn
overlapdial=yes # must add this line
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
Figure 6 A part of dahdi-channels.conf
3. Asterisk initiation
Execute a command to start Asterisk:
# asterisk -vvvvvvgc
If Asterisk is already activate, run
"asterisk –r"
instead.
In the CLI, please run the following commands
"dahdi show channels"
and
"pri show spans"
:
*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
1 fRom-isdn default In Service
2 fRom-isdn default In Service
*CLI>
*CLI> pri show spans
PRI span 1/0: Provisioned, Up, Active
*CLI>
Figure 7 channels and spans show
If you can see the span is up and active status, it means successful
installation. Otherwise, please check the setting files and physical
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
