A400M on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
11
➢
Fix the board by a screw
➢
Power on PC
MINI PCI slot
A400MS
A400MM
IDE flat cable
Channel 1
Channel 2
Channel 3
Channel 4
The jumpers should be set
to match the modules you
have setup
Figure 2 Hardware setup
Caution:
If any FXS module is setup, you should make
power on. During the above processes, an ESD wrist strap
is needed. Once power is on, you must not attempt to
install or take down the board. Do not forget to connect PSTN lines into
analog phones directly to make sure the lines and phones are available
before insert the PSTN lines into FXO ports. After hard ware setup, it is
time to install software.
