A400E on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
23
After modifying the country mode, please execute the following
command:
# dahdi_cfg –vvvvvv
The command is used for reading and loading parameters in the
configuration file system.conf and writing to the hardware. A part of
outputs are showed in the following figure.
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 04)
4 channels to configure.
Setting echocan for channel 1 to none
Setting echocan for channel 2 to none
Setting echocan for channel 3 to none
Setting echocan for channel 4 to none
Figure 8 Channel map
3. Asterisk initiation
# asterisk -vvvvvvvgc
If Asterisk is already activate, run
"
asterisk –r
"
instead. In the CLI,
please run the following command:
localhost*CLI> dahdi show channels
http://ArtTel.ru
