A1200P on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
12
modules correspond to FXS ports which provides power (battery) and
generates ring signals.
2.5 Splitter
A RJ45 interface of A1200P is divided into four RJ11 ports by a specific
splitter as the picture of Appendix B stated. So you should prepare for
some splitters when install A1200P.
2.6 Hardware setup procedure
Power off your PC, remember unplug the AC power cable
Insert A1200P into a 3.3V or 5.0V PCI slot vertically
Put timing cable appropriately if nesessary
Please plug PSTN lines into FXO ports and extension telephone lines
into FXS ports
Fix the board by a screw
Power on PC
After power on, three rows in total 12 LEDs of the board left will be
light which reflect channels’ status, one LED corresponds to a
module.
