OpenScape CP200 Page 105 User Manual Download

Page: 105 / 155

105

Call forwarding by call type

If use of system-assisted functions has been enabled by the administrator and
the

Forwarding Int/Ext

function activated, call forwarding by call type function-

ality will be available to you. Forwarding in this case is dependent on the for-
warding type and additionally on the call type. The menu layout therefore devi-
ates from that for standard forwarding



page 98. You can also change,

activate and deactivate call forwarding during a call.

Forwarding menu

The Forwarding menu is opened either using the configured "Variable call for-
warding" key (see



page 59) or via the user menu (



page 46) and contains

the three forwarding types:
• Unconditional
• Busy
• No reply

Because of its direct impact, "

Uncond’l

" call forwarding has the highest priority

followed by "

No reply

" and "

Busy

If active, "

Uncond’l

" call forwarding is indicated on the display when the phone

is idle. Forwarded calls can be logged in a call list (see



page 23).

The three forwarding types are each assigned three call types in the

Forward-

ing

menu:

Uncond’l

– All calls
– External
– Internal

Busy

– All calls
– External
– Internal

No reply

– All calls
– External
– Internal

Summary of Contents for CP200




























































































































































Search results

Summary of Contents for CP200

Reviews:

Related manuals for CP200

Brands by name

Popular brands

OpenScape CP200, User Manual

Search results

Summary of Contents for CP200

Reviews:

Related manuals for CP200

Brands by name

Popular brands