www.openplan.com | [email protected] | 844.OPS.OPS1 | REV 03.11.21
DSH-LU DESK SCREEN DIVIDER
ASSEMBLY GUIDE
Install Corner Brackets at the top where two
screen corners meet by sliding screen edge
into bracket channel. Tighten bolt to secure.
Install Surface Brackets below work surface
with self-tapping screws. Slide screen edge
into bracket channel and tighten bolt to
secure.
2.
Install Clamp Brackets at the end of
each screen run. Clamp Brackets is
installed with self-tapping screws.
Tighten knob to secure screen.
3.
Install Surface Brackets to a Corner Bracket using (4)
provided screws.
1.
When installing Clamp Bracket,
adjustment knob should be facing
inside the work surface.
Surface Bracket is attached
beneath work surface with
self-tapping screws.
Clamp Bracket
Surface Bracket
Corner Bracket