Opengear MFC-8322-S, User Manual

Page: 31 / 72

MFC-8322-S and MFC-OG3-N User Manual (Iss. 01) MFC-OG3-N Series Setup • 4–1
MFC-OG3-N Series Setup
In This Chapter
This chapter provides information on setting up and using the card-edge controls of the
MFC-OG3-N and MFC-OG3-NS Controller Cards. The MFC-OG3-N and MFC-OG3-NS bring
GigE ethernet connectivity to the OG3-FR frames infrastructure, providing a DashBoard
interface to monitor openGear cards in the frame. The MFC-OG3-NS includes the SNMP
Monitoring option.
The following topics are discussed:
• Card-edge Controls for the MFC-OG3-N
• Configuring the DIP Switches
• Monitoring the MFC-OG3-N
Caution
— You must install the MFC-OG3-N and MFC-OG3-NS into an OG3-FR
series frame. Attempting to install the MFC-OG3-N or MFC-OG3-NS in another frame
type can damage your card.