IM4216-34 Quick Start (520038-Rev 1.0)
Page 2
Note:
The computer must have an IP address in the same network range
(192.168.0.xxx) as the console server. Alternately, you can use the
ARP Ping
command
to set the IP address (refer
User Manual
or online FAQ for details). The console server
also DHCP client enabled by default. It will automatically accept any network IP address
assigned by any DHCP server on your network – and will then respond at both
192.168.0.1 and its DHCP address.
Select
System: IP
then
Network Interface
and check
DHCP
or
Static
for
Configuration Method
The second Ethernet network port (
NETWORK2
) is inactive by default. It can be set up
for failover/OoB access (refer User Manual).
The integrated Ethernet switch provides a 32 port
management LAN with firewall/router isolation and
DHCP server. By default these ports are inactive.
To activate:
Select
System: IP
then
Management LAN
Interface
and uncheck
Disable
Enter the
IP Address
and
Subnet Mask
for
the Management LAN network segment,
leaving
Gateway
and
DNS
fields blank)
If you wish to use the DHCP server, refer to
the
User Manual
Note
:
The console server
’s firewall determines which protocols/ services can be
used to access which ports/ devices. Please refer to the User Manual and FAQs before
changing any of the default services or access settings.
