CM4116, CM4132 & CM4148 Quick Start (520004-Rev 3.5)
Page 3
A
Logging Level
may also be set to
specify the level of information to be
logged and monitored for the serial port
Click
Apply
To enable access through the console server to a locally networked computer
(referred to as a
host), select
Serial & Network: Network Hosts
and click
Add Host
Enter the
IP address/DNS Name
of the host
Edit the
Permitted Services
used for accessing this host, e.g. HTTPS (TCP
port 443), VNC (TCP port 5900), or add custom TCP or UDP port numbers – only
the services specified here are tunneled through to the host, all other services
are blocked
At this stage you may also specify the level of information to be logged and
monitored for each host access
Click
Apply
Step 5
Add new users
Note:
It is recommended that you set up a new Administrator user (in the
admin
group with full access privileges) and login as this new user for all ongoing
administration functions (rather than continuing as
root)
For each new user, select
Serial & Network: Users & Groups
and click
Add
User
Enter a
Username
and enter and confirm a
Password
,
and nominate the
Accessible Hosts
and
Accessible Ports
the user is allowed to access
To grant limited access to the Management Console, check the
user
Group
, to
grant full access to the Management Console, check the
admin
Group
– by
default the user is granted no Management Console access
Click
Apply
Please register your product
to activate the warranty and to
automatically receive advice of future firmware updates.
Go to:
http://opengear.com/product-registration.html
