OpenEye Optix CM-525P User Manual Download Page 5

27104AF

5

COMPLIANCE STATEMENT 

 CE COMPLIANCE STATEMENT 

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY 
CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO 
TAKE ADEQUATE MEASURES.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE A EST CONFORME A LA NORME NMB-003 

DU CANADA.

FCC INFORMATION

: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY 

WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF 
THE FCC RULES.  THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE 
PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS 
OPERATED IN A COMMERCIAL ENVIRONMENT.  THIS EQUIPMENT GENERATES, 
USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND 
USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL 
INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT 
IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH 
CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN 
EXPENSE.

CAUTION:

 CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE 

PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO 
OPERATE THE EQUIPMENT.

Summary of Contents for Optix CM-525P

























































Reviews: