71
If the burner will not come on, the following items should be checked
before calling a service person:
1. Switch turned off.
2. Gas supply to heater is empty or turned off.
3. Reset button on ECO is tripped.
To Turn Off Water Heater:
ON
RESET
1. Turn switch to “OFF” position.
2. Turn off the electrical power to the appliance.
3. Turn off gas supply.
4. If the vehicle is to be stored or the heater
is going to be turned off while subject to
freezing temperature, drain the water heater.
120 Volt AC Option
Electric water heaters are designed to operate with a minimum amount of
service problems; however, proper operation and care is essential.
By far the most common trouble with electric water heaters results
from energizing the water heater before it is filled with water. Even brief
operation of the electric element without water in the tank will burn-out
the electric heating element.
To energize the electric heating element, turn the switch to “ON”. The
switch is located behind the water heater door in the lower left corner
of the control housing. The water temperature will be regulated by the
thermostat.
When you have this 120-volt AC option, you will find an additional wall
switch noted as “water heater”. This will turn on 120 volt to energize the
water heater.
DO NOT operate the water heater with two energy sources in
operation or without water.
!
CAUTION
Winterizing Your Water Heater
If your water heater plumbing system is equipped with a bypass kit, use it
to close off the water heater. Drain the water heater completely and leave
the water heater closed off (out of the system) in the bypass position
particularly if you are introducing antifreeze into the plumbing system.
