3
To review OGM2: press 8 7, listen for
beep, 5 2, listen
To review OGM3: press 8 7, listen for
beep, 5 3, listen
Call Forwarding:
Allows the H650IVN to forward incoming calls on line 1 or line 2 to
any number you specify (up to 16 digits). Each incoming line can forward to different
numbers or the same number. But only one call may be forwarded at a time.
Note: When a call is forwarded by the H650IVN it will dial the assigned number and use
a forwarding tone of three beeps every two seconds to notify you of a forwarded call.
Press 1 to answer and you will be connected to the caller. If you do not wish to answer,
hang up and the H650IVN will processes the call through the set CHM. Or press # and
then hang up and the call will be disconnected from the H650IVN.
To forward line one or two to another phone from any zone do the following-
Line 1: press *, 6 2 1, enter forwarding number, #, listen for beep beep
Line 2: press *, 6 2 2, enter forwarding number, #, listen for beep beep
After entering the forwarding number, you can active this feature by doing the following:
Line 1: press *, 6 1 1, #, listen for beep beep
Line 2: press *, 6 1 2, #, listen for beep beep
To activate both lines: press *, 6 1 3, #, listen for beep beep
To deactivate both lines: press *, 6 1 0, #, listen for beep beep
Note: Call forwarding needs to be activated and deactivated for each CHM mode.
You need to be in the proper CHM mode before setting the call forwarding mode.
Incoming Call Alert:
Like call waiting, this feature notifies you with a tone that a second
call is coming in on the other available line when you are currently using the phone. The
tone is every ten seconds. The default setting is off to active:
Call alert function on: press *, 5 9 1, listen for beep beep.
Call alert function off: press *, 5 9 0, listen for beep beep.
Using Call Waiting functions from the phone company:
Allows the user to use
phone company call waiting functions that do not use the second incoming line. Phone
company call waiting toggles two calls together on a single line.
When the call waiting tone is heard: press flash, wait for beep, press 4 and you will be
connected to the call waiting. To reconnect to the original call, repeat the previous step.
Note: This is a phone company service. This is not Incoming call alert. Incoming call
alert notifies you of a call coming in on the second phone line.
